Occupancy - From a Revenue and Cost Perspective - WFManagement

Breaking

Sunday 22 September 2019

Occupancy - From a Revenue and Cost Perspective



My previous two blogs had a overwhelming response and I would like to thanks the readers for making it very memorable.

Most of us in WFM would have heard the word "Occupancy" a lot.

In my view, Occupancy is the resultant of the definition of WFM - "Right People with right skills at right time".

Occupancy is sometimes confused as "Productivity" and "Utilization", but in reality they are measuring different things.

Occupancy answers the question: for what percentage of the time that the FTEs are logged in live and are actually busy with a customer activity, or are available to do more?

Utilization answers the question: for what percentage of the time that FTEs get paid and are logged in and assisting or available to assist with a customer activity?

Productivity comes from the word ‘productive’. As a result, productivity can easily be understood as the comparison between the rate of output versus per unit of input.

I'll write more on these in the upcoming blogs.

We can calculate the occupancy using many methods and I've mentioned some of them below.

  • Using Historical Data
If we have historical data, even for the past one interval, we can calculate the occupancy using the below formula.


But this method is restricted for only historical use.

  • Using Workload Formula
When we have the volume, AHT, FTE etc., we can calculate occupancy using the below formula.


This method can be used for both Historic and Futuristic.

  • Using Erlang
For the case of immediate response queues such as Inbound, Chat, Social Media etc., we can use the Erlang formula to calculate the occupancy as mentioned below.

=Utilization(Agents, Calls per Interval, AHT)


There are many methods to calculate occupancy for Deferred Media out of which the Time and Motion Study is the main method.

Time and motion study is a work measurement technique for recording the times of performing a certain specific job or its elements carried out under specified conditions.

Apart from just the Volume, AHT and FTE, the Intraday Pattern and the SL Goal also plays a major role in Occupancy.

However, irrespective of how we calculate and what we call it as, it is the same and can be termed as "Occupancy".

But, did you know apart from this, we have other occupancies which are calculated and mainly comes from a Revenue perspective?

Those are called Staffed, Actual and Billed Occupancy

For us to understand those occupancies, we need to first look at a capacity planner.

The main reason for a capacity planner is because that is the easiest way to know how future looks like.

If anyone is not aware of what a capacity planner is, there is a wonderful blog written on it and can be accessed using the link below.

Capacity Planner - Blog

I've attached a sample capacity planner at the end of this blog where the calculations are more elaborated in context with the topic here.

Make sure to check the planner.

There are some major inputs required for us to calculate the occupancy that could be taken from the capacity planner.

Let's deep dive into each one of them to understand more.

  • Staffed Occupancy
To build a capacity planner, occupancy is used as a input for us to calculate the FTE Required and the call capacity.

This occupancy comes out of any of the methods mentioned above and are mainly calculated using the Forecasted Volume and Target AHT.

This occupancy is termed as "Staffed Occupancy".

I just took the weighted average against the Projected FTE to find out the overall Staffed Occupancy.

  • Actual Occupancy
The main agenda of building a capacity planner is to make sure we don't have any Head Count deficit in the future.

For this, we bring new hire batches which could be due to attrition back fills or Ramp up.

However due to some restrictions sometimes, we end up having more or less than the required.

When we have excess staff, the call capacity will be higher than the forecasted volume, but in an ideal scenario we cannot handle more than the forecasted volume.

In the same way, when we have staffing deficit, the call capacity will be lesser than the forecasted volume and we can handle only those volumes.

Of course, we can handle more calls by using support staff or by overtime. Let's not consider that for this context since they are planned mainly on a real time basis.

So, whichever is minimal between the forecasted volume and the call capacity would be called as "Billable Volumes".

Also, the newbies go through a AHT Learning Curve to get accustomed to the process. Due to this, the overall weighted AHT will be higher than the Target AHT.

Due to the variance between the forecasted volume and call capacity and between overall AHT and Target AHT, the occupancy is impacted.

It could either increase or decrease when compared to the Staffed Occupancy on a monthly basis.

But, the Actual Occupancy will definitely be lower than the Staffed Occupancy on a overall basis.

So to calculate the Actual Occupancy, below are the required inputs.
  1. Minimum Volume between Volume Forecast and Call Capacity (Billable Volume)
  2. Weighted AHT which includes the Learning Curve
  3. Projected FTE
  4. Shrinkage

  • Billed Occupancy
As told earlier, the Weighted AHT will always be higher than the Target AHT due to the new hire AHT Learning Curve.

This necessarily doesn't mean that we can bill the client at the Weighted AHT.

Therefore only Target AHT can be used and is called as "Billable AHT".

That is the only difference between the calculation of Actual and Billed Occupancy where instead of using Weighted AHT, we use the Target AHT to calculate the Billed Occupancy.

So to calculate the Billed Occupancy, below are the required inputs.
  1. Minimum Volume between Volume Forecast and Call Capacity (Billable Volume)
  2. Target AHT (Billable AHT)
  3. Projected FTE
  4. Shrinkage
The Billed Occupancy will definitely be lower than the Actual since the AHT is lesser.

If you look at the attached Capacity Planner for the numbers, you can see a decreasing trend between Staffed, Actual and Billed in a descending order.

The deviation between the Staffed and Actual Occupancy mainly comes due to the over/under staff which we plot.

And the deviation between the Staffed and Billed is mainly due to the AHT Learning Curve.

Higher FTE will lower the Actual Occupancy and vice versa.

And at the same time higher the Learning Curve, lower the Billed Occupancy.

After reading this blog you must be wondering why are we even doing this? 

What is the use of calculating these occupancies?

Well, to know that please look forward for my next blog.

I'll end this up with a beautiful quote.
An educated workforce is the foundation of every community and the future of every economy
As always, thank you for reading.

Stay Tuned!!



Disclaimer: The postings on this site are my own and do not necessarily reflect the views of my employer.